First Semester:
2nd Semester:
ADC Shopping Cart Contents as of 04/07/2024 from www.AutomationDirect.com |
||||
Item Code |
Quantity |
Short Description |
Price |
|
1 |
MTR2-P33-3BD36 |
1 |
IronHorse MTR standard efficiency AC induction motor, general purpose and inverter rated, 1/3hp, 3-phase, 230/460 VAC, 3600rpm, TEFC, 56C frame, rolled steel, C-face/removable rigid base mount. |
$167.00 |
2 |
GS21-10P5 |
1 |
DURApulse GS20 series AC general purpose drive, enclosed, 120VAC, 1/2hp with 1-phase input, SVC, V/Hz, FOC or torque mode, A3 frame, RS-485, Modbus, 100kA SCCR, Optional EtherNet/IP and Modbus 1 TCP card available. |
$167.00 |
3 |
176109-1 |
1 |
IDEM micro limit switch, lever hinge long, (1) N.O./ NC contacts, snap action, 25.4mm hole spacing, polybutylene terephthalate, screw terminals. |
$12.00 |
4 |
AK1-A0-2A |
1 |
Micro Detectors inductive proximity sensor, tubular, 18mm diameter x 50mm body, nickel-plated brass housing, NPN/PNP, N.O. output, 8mm sensing distance, non-flush, 300 Hz switching frequency, IP67, one pigtail. |
$27.00 |
5 |
PSL-24-090 |
1 |
RHINO PSL series switching power supply, 24 VDC @ 3.8A/91.2W (adjustable), 120/240 VAC or 125-250 VDC nominal input, 1- phase, enclosed, plastic housing, 35mm DIN rail mount, screw terminals, NEC Class 2. |
$66.00 |
6 |
KPR-SCE-24VADC-1 |
1 |
Klemsan interface relay, 35mm DIN rail mount, finger-safe, 24VAC/VDC coil voltage, SPDT, (1) N.O., (1) N.C., 6A contact rating, screw terminal(s), LED indicator(s). |
$8.00 |
7 |
782-2C-24D |
2 |
AutomationDirect ice cube control relay, socket mount, encapsulated push-to-test, 24 VDC coil voltage, DPDT, (2) N.O., (2) N.C., 15A contact rating, 8-pin, LED indicator(s). Requires 782-2C-SKT mounting socket. |
$13.00 |
8 |
782-2C-SKT |
2 |
AutomationDirect relay socket, 35mm DIN rail or panel mount. For use with 782 and AD-70S2 series cube relays. |
$9.00 |
9 |
T2L-ND-31-240U |
1 |
ProSense on-delay inline relay timer, 1 to 100 seconds timing range, 24-240 VAC and 12- 48 VDC operating voltage, 1A contact rating, (1) SPNO timed solid state relay output(s), surface mount, 1/4in male quick-connect terminal. |
$24.00 |
10 |
P2-START2 |
1 |
Productivity2000 starter kit with Ethernet. |
$649.00 |
11 |
GSDA-5K |
1 |
IronHorse GSD series speed potentiometer kit, replacement, output up to input voltage, 5k ohm, 0.5W. For use with all GSD series DC drives. Includes potentiometer, knob, 0-100% dial, and mounting hardware. |
$21.00 |
12 |
DR16F0N-E3G |
1 |
Fuji Electric LED indicating light, permanent light function, IP65, 16mm, green, 24mm, rectangular, plastic base, plastic bezel, 24 VAC/VDC, full voltage. |
$12.00 |
13 |
DR16F0N-E3R |
1 |
Fuji Electric LED indicating light, permanent light function, IP65, 16mm, red, 24mm, rectangular, plastic base, plastic bezel, 24 VAC/VDC, full voltage. |
$12.00 |
14 |
DR16F0N-E3W |
1 |
Fuji Electric LED indicating light, permanent light function, IP65, 16mm, white, 24mm, rectangular, plastic base, plastic bezel, 24 VAC/VDC, full voltage. |
$12.00 |
15 |
DN-R35S1-2 |
1 |
DINnector DIN rail, slotted, 35mm, 7.5mm height, 1mm length, plated steel. Package of two. |
$11.00 |
16 |
KN-T12GRY-25 |
1 |
Konnect-It screw single level feedthrough terminal block, accepts wire size 26- 12 AWG, gray, 20A, 35mm DIN rail mount, 100kA SCCR. Package of twenty-five. For use with jumpers KN-2J12, KN-3J12, KN-4J12 and KN-10J12. |
$9.00 |
17 |
CF6-15-04-1 |
20 Ft. |
igus continuous flexing control cable, shielded, four conductors (includes ground), 16 AWG (1.50mm2), bare copper, PVC conductor insulation material, black with white numbers and green/yellow ground, PVC jacket, green, cut to length. |
$92.20 |
18 |
CF30-25-04-1 |
20 Ft. |
igus continuous flexing motor supply cable, unshielded, four conductors (includes ground), 14 AWG (2.50mm2), bare copper, TPE conductor insulation material, black with white print and green/yellow ground, PVC jacket, black, cut to length. |
$73.80 |
19 |
BSPCX-22-W |
1 |
Bimed cable gland, 1/2in NPT thread type, polyamide, black, accepts 10 to 14mm diameter cable, IP68. Package of five. Mounting hardware included. |
$8.50 |
20 |
FAZ-D6-1-SP |
2 |
Eaton miniature supplementary protector, 6A, 277 VAC / 48 VDC, 1-pole, D curve, thermal magnetic, 5kA @ 277 VAC interrupting rating. 35mm DIN rail mount. |
$30.00 |
Total Invoice: |
$1423.50 |
|||
Other required items |
||||
Plywood |
1 |
1/2" Plywood, 14” wide x 24” long |
||
Meter |
1 |
Quality Electrical Meter |
||
Power supply |
1 |
GFCI protective receptacle for obtaining power. |